I found this excellant T9 Nav on Singtel e-ideas
http://www.appzone.singtel.com/singtel/content_getItemDetails.do?iid=3203&ddN=T9%20Nav&tsi=63481802359383502650&&deviceDisplayName=T9%20Nav
after i disappointed with Nokia advance search
I like the previous In device search to be able to search by numbers
The other applications I like ....SMS preview
I have to check out other in ovi store
Friday, December 25, 2009
Re-install Nokia E72
Yesterday, I have to make a trip to Nokia Care centre
and at the end I have learned how to fresh install E72
Here is some summary
On PC
To do PC suite cleaner to clean up register in PC
To reinstall PC suite
To reinstall Ovi suite
To do a backup and sync on both PC and OVI suite
On E72
(Disclaimer: Please first understand the consequence before you do that as last resort !
Do not blame me if you do not perform a full backup before that.
Try to do other "software" reset using *#7780# )
To do "total" software reset on E72, "dial" *#7370#
(you will be prompt "Restore all original phone setting" So do think twice
lock code is 12345)
To recovery the last working status
Either
Fr Sync on PC and OVI suite
(If first option is recommeded, or a full restore is choosen)
These process is repeated until a full working copy is reached
Things to take note
All the applications download is gone after the hard reset
so dun do it after purchase some paid application
In my case I have spent $1 for one finance software
Please do a full-backup and sync in both PC and OVI suite
That is four combination of backup
Believe me, until Nokia settle on one complete solution
At this moment, for any model of Nokia it is advisable to do four operations before
any "total" factory reset
It is because, my problem this time, my Nokia messaging is reset by Nokia Philiphine
to detach from all my emails (ie Exchange, yahoo, OVI, hotmail)
At the same time, my OVI on PC fails at the same time
So to restore my E72 need lot of time as I restore each module at one time
So in the process, I learn the hard way
For example If i do restore in my case,
I will restore bad setting of not able to remove mailbox at the same time
So I can only sync back SMS in Ovi
(I can sync back contact after I did a full restore )
and at the end I have learned how to fresh install E72
Here is some summary
On PC
To do PC suite cleaner to clean up register in PC
To reinstall PC suite
To reinstall Ovi suite
To do a backup and sync on both PC and OVI suite
On E72
(Disclaimer: Please first understand the consequence before you do that as last resort !
Do not blame me if you do not perform a full backup before that.
Try to do other "software" reset using *#7780# )
To do "total" software reset on E72, "dial" *#7370#
(you will be prompt "Restore all original phone setting" So do think twice
lock code is 12345)
To recovery the last working status
Either
Fr Sync on PC and OVI suite
(If first option is recommeded, or a full restore is choosen)
These process is repeated until a full working copy is reached
Things to take note
All the applications download is gone after the hard reset
so dun do it after purchase some paid application
In my case I have spent $1 for one finance software
Please do a full-backup and sync in both PC and OVI suite
That is four combination of backup
Believe me, until Nokia settle on one complete solution
At this moment, for any model of Nokia it is advisable to do four operations before
any "total" factory reset
It is because, my problem this time, my Nokia messaging is reset by Nokia Philiphine
to detach from all my emails (ie Exchange, yahoo, OVI, hotmail)
At the same time, my OVI on PC fails at the same time
So to restore my E72 need lot of time as I restore each module at one time
So in the process, I learn the hard way
For example If i do restore in my case,
I will restore bad setting of not able to remove mailbox at the same time
So I can only sync back SMS in Ovi
(I can sync back contact after I did a full restore )
Wednesday, October 07, 2009
bootable window xp sp2
just for a record for good site to make a
bootable window xp sp2 cdrom
http://www.winsupersite.com/showcase/windowsxp_sp2_slipstream.asp
as i find out yestersday that the external usb 160 Gb hdd does not
boot in windows
(even thought the ubuntu works very well even without
making the extra FAT16 partition as in the other 40Gb HDD)
In search for solution
I found the following
http://www.nu2.nu/pebuilder/#download
bootable window xp sp2 cdrom
http://www.winsupersite.com/showcase/windowsxp_sp2_slipstream.asp
as i find out yestersday that the external usb 160 Gb hdd does not
boot in windows
(even thought the ubuntu works very well even without
making the extra FAT16 partition as in the other 40Gb HDD)
In search for solution
I found the following
http://www.nu2.nu/pebuilder/#download
Sunday, October 04, 2009
dual boot on window and linux
After I have install Windows XP
I have tried few times to install the next Linux OS
After few tries to install Fedora
I met with few strange problems
So I give up and install Ubuntu
As in last time the installation run smoothly
Without doing anything
The following Grub menu.lst has been automatically setup
under /boot/grub/menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=df922b34-b32a-41ed-b52e-1f4844406dd4 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=df922b34-b32a-41ed-b52e-1f4844406dd4
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04, kernel 2.6.28-15-generic
uuid df922b34-b32a-41ed-b52e-1f4844406dd4
kernel /boot/vmlinuz-2.6.28-15-generic root=UUID=df922b34-b32a-41ed-b52e-1f4844406dd4 ro quiet splash
initrd /boot/initrd.img-2.6.28-15-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-15-generic (recovery mode)
uuid df922b34-b32a-41ed-b52e-1f4844406dd4
kernel /boot/vmlinuz-2.6.28-15-generic root=UUID=df922b34-b32a-41ed-b52e-1f4844406dd4 ro single
initrd /boot/initrd.img-2.6.28-15-generic
title Ubuntu 9.04, kernel 2.6.28-11-generic
uuid df922b34-b32a-41ed-b52e-1f4844406dd4
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=df922b34-b32a-41ed-b52e-1f4844406dd4 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid df922b34-b32a-41ed-b52e-1f4844406dd4
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=df922b34-b32a-41ed-b52e-1f4844406dd4 ro single
initrd /boot/initrd.img-2.6.28-11-generic
title Ubuntu 9.04, memtest86+
uuid df922b34-b32a-41ed-b52e-1f4844406dd4
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Microsoft Windows XP Professional
rootnoverify (hd0,0)
savedefault
makeactive
chainloader +1
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda3
title Microsoft Windows 7 (not installed yet)
rootnoverify (hd0,2)
savedefault
makeactive
chainloader +1
but the last section was edited
as Other OS and windows 7 are not available yet
I have tried few times to install the next Linux OS
After few tries to install Fedora
I met with few strange problems
So I give up and install Ubuntu
As in last time the installation run smoothly
Without doing anything
The following Grub menu.lst has been automatically setup
under /boot/grub/menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=df922b34-b32a-41ed-b52e-1f4844406dd4 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=df922b34-b32a-41ed-b52e-1f4844406dd4
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04, kernel 2.6.28-15-generic
uuid df922b34-b32a-41ed-b52e-1f4844406dd4
kernel /boot/vmlinuz-2.6.28-15-generic root=UUID=df922b34-b32a-41ed-b52e-1f4844406dd4 ro quiet splash
initrd /boot/initrd.img-2.6.28-15-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-15-generic (recovery mode)
uuid df922b34-b32a-41ed-b52e-1f4844406dd4
kernel /boot/vmlinuz-2.6.28-15-generic root=UUID=df922b34-b32a-41ed-b52e-1f4844406dd4 ro single
initrd /boot/initrd.img-2.6.28-15-generic
title Ubuntu 9.04, kernel 2.6.28-11-generic
uuid df922b34-b32a-41ed-b52e-1f4844406dd4
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=df922b34-b32a-41ed-b52e-1f4844406dd4 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid df922b34-b32a-41ed-b52e-1f4844406dd4
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=df922b34-b32a-41ed-b52e-1f4844406dd4 ro single
initrd /boot/initrd.img-2.6.28-11-generic
title Ubuntu 9.04, memtest86+
uuid df922b34-b32a-41ed-b52e-1f4844406dd4
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Microsoft Windows XP Professional
rootnoverify (hd0,0)
savedefault
makeactive
chainloader +1
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda3
title Microsoft Windows 7 (not installed yet)
rootnoverify (hd0,2)
savedefault
makeactive
chainloader +1
but the last section was edited
as Other OS and windows 7 are not available yet
Friday, October 02, 2009
Grub over GRLDR
the following is the
boot.ini
[boot loader]
timeout=10
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect /NoExecute=AlwaysOff
C:\GRLDR="深度一键还原 GHOST V11.0"
menu.lst
that come from the Ghost image of 深度 Chinese XP
default 2
timeout 5
fontfile /boot/load/fonts.gz
splashimage /boot/load/deepin.xpm.gz
title ☆ 深度技术论坛 一键还原工具 ☆
clear
#..
title ──────────────────────────────────
clear
title 启动 一键还原 Ghost v11.0
map --mem /boot/load/ghost.img (fd0)
map --hook
chainloader (fd0)+1
rootnoverify (fd0)
title ──────────────────────────────────
clear
title 启动本机硬盘的 WINDOWS NT/2003/XP 系统
map (hd0) (hd0)
map (hd0) (hd1)
root (hd0,0)
chainloader (hd0,0)+1
boot
rootnoverify (hd0,0)
chainloader +1
clear
title 启动本机硬盘上 VISTA 系统(如果存在)
find --set-root /bootmgr
chainloader /bootmgr
clear
title ──────────────────────────────────
clear
title 从第二硬盘启动系统
fallback 6
root (hd0,1)
chainloader +1
title 从光驱启动系统
cdrom --init
map --hook
Later I will try to edit this by adding Grub and linux to it
Hope this time it will works this time
Monday, September 28, 2009
My Nokia E65 almost gone
Today I was trying to update my Nokia E65
I was very careful as the data connection is always loose
During the firmware update
the connection lost
I was so desperate that I stop the process
and forgot to read the warning that
PC suite will report error that the connection lost
I dun know what to do and
I take out the battery and can not get the hp turn on
So for one or more hour I keep trying to update the firmware
even though the hp has no respond screen
It has passed 5pm and Nokia care centre has been closed for Sunday
After many tries, miracle happens
the time for the update reduce to 2min
Finally it said the update has completed
I crossed my finger and take out battery then switch on
The hp turn on after many prayers in my heart
Even though I would like to change hp but I dun want to change in this circumstances
But the blessing is that I recovered the original black scheme
I also manage to install fring and get it works
That is the biggest reward as I was able to make VoIP call
I was very careful as the data connection is always loose
During the firmware update
the connection lost
I was so desperate that I stop the process
and forgot to read the warning that
PC suite will report error that the connection lost
I dun know what to do and
I take out the battery and can not get the hp turn on
So for one or more hour I keep trying to update the firmware
even though the hp has no respond screen
It has passed 5pm and Nokia care centre has been closed for Sunday
After many tries, miracle happens
the time for the update reduce to 2min
Finally it said the update has completed
I crossed my finger and take out battery then switch on
The hp turn on after many prayers in my heart
Even though I would like to change hp but I dun want to change in this circumstances
But the blessing is that I recovered the original black scheme
I also manage to install fring and get it works
That is the biggest reward as I was able to make VoIP call
Sunday, September 27, 2009
New broadband connnection program
Yestersday I do a update
When I turn on the ubuntu again
I being prompt to configure the "New broadband connection"
In the process I being ask to choose the ISP
and listed
SingTel
M1
StarHub
After I choose SingTel and it look remain the same
I record in this blog maybe one day I will know the reason for it
When I turn on the ubuntu again
I being prompt to configure the "New broadband connection"
In the process I being ask to choose the ISP
and listed
SingTel
M1
StarHub
After I choose SingTel and it look remain the same
I record in this blog maybe one day I will know the reason for it
Saturday, September 26, 2009
山寨网本
在发出电邮给朋友关于山寨网本后
搜索到 山寨umpc
可放入口袋 俄罗斯“山寨”UMPC也能爽玩Win7
可惜还是给外国人强了先机
但如果能把价格降下来
如加上 linux
去掉 1390
加上 WIFI
给多点内存
加上手机功能
就比如现在的山寨手机
那就好了。。。
搜索到 山寨umpc
可放入口袋 俄罗斯“山寨”UMPC也能爽玩Win7
可惜还是给外国人强了先机
但如果能把价格降下来
如加上 linux
去掉 1390
加上 WIFI
给多点内存
加上手机功能
就比如现在的山寨手机
那就好了。。。
Saturday, September 19, 2009
compressed tool
to install rar and unrar tools
$ sudo aptitude install p7zip p7zip-full rar unrar
the unrar tool can convert to zip file
by doing a save as zip format
$ sudo aptitude install p7zip p7zip-full rar unrar
the unrar tool can convert to zip file
by doing a save as zip format
Subscribe to:
Posts (Atom)